GCode

GCA200 - STATIC GRIP® Series RTI® Optimal Drop Pistol Platform fits belts up to 2 Inches. Heavy Duty RTI® Tactical Belt Mount. Inner hook lining to provide a solid non-shifting mount when used in conjunction with a loop lined tactical belt.

GCA30 - RTI DUTY Mount Belt Slide

Perfect for use in areas where you are frequently putting on and removing a jacket, or you want your gun lower and out of the way of armor or chest rigs and you don't want to use a leg rig.

GCA37 - RTI Belt Slide is designed for tactical operators, law enforcement, and concealed carriers. This holster mounting system allows you to attach any RTI-equipped holster or accessory and fine-tune the draw angle to your exact preference.

GCA77 - MULE® ISS CARRY PLATFORM  intended to bridge the gap between traditional belt and thigh transport options. It Rides Higher than a Drop Leg System and Lower than a Duty Mount with the addition of a leg strap. Various Belt Attachment Methods are available for the MULE

GCA42 - RTI H-MAR MOLLE Adaptor.
Works well on tactical vests and plate carriers. RTI Wheel has 12 angles it can be mounted at, like a clock face.
A lot of guys want that horizontal mount on the chest, this allows for that.

BladeTech

Drop Leg Platform

pre-installed with Tek-Mount Receiver  which allows you to have a stable mounting surface for attaching holsters and gear to your thigh.

Duty Drop and Offset

pre-installed with Tek-Mount Receiver  which allows you to have a stable mounting surface for attaching holsters and gear to your thigh.

Drop-Offset (short) with Tek-Lok pre-installed with Tek-Mount Receiver  which allows you to have a stable mounting surface for attaching holsters and gear to your thigh.

Tek-Mount on Tek-Lok Belt Attachment can accommodate up to a 2.25” belt. While the Tek-Mount 360 Insert Disk is to be affixed to your holster, mag pouch, knife sheath, or any other carried gear.

Tek-Mount on Molle-Lok Belt Attachment

pre-installed which allow you to mount to your MOLLE/PALs webbing. While the Tek-Mount 360 Insert Disk is to be affixed to your holster, mag pouch, knife sheath, or any other carried gear.

Tek-Mount Mini on Tek-Lok or Molle-Lok is a two-part quick connect mounting system that consists of a receiver and a Mini 360 Insert Disk is to be affixed to single Mag Pouches, Tourniquet Pouches, Handcuff Pouches, Knife Sheaths or any other carried gear.

OWB Attachments

SpeedEase belt clips enable ambidextrous holster weapon draw. They clip over belt up to 1.75 inches wide without removal.

SpeedEase

fit standard 1.50" and 1.75" belts. Designed for quick, secure mounting and dismounting of OWB holsters without removing your belt.


OWB - MM Wings are designed and made in the USA.

MM Wings

fit standard 1.50" and 1.75" belts.


Dura-Grip (Speed Clips) by MatchPoint. Engineered for quick, secure mounting and dismounting of OWB holsters.

Dura-Grip

fit standard 1.50" and 1.75" belts. Designed for quick, secure mounting and dismounting of OWB holsters without removing your belt.


ASR (Adjustable Stingray Loop) attachment offers a stable and secure platform. Fits belts up to 2.25

ASR (Adjustable Stingray Loop) Fits belts up to 2.25". The wide belt loops of the ASR also create extra stability, preventing the holster from shifting around.

Tek-Lok™ is a belt loop mounting system that works on sheaths or gun holsters.
Molle Compatible Lock is designed to attach accessories to the Pals/Molle.
Mod-Lok by Blade-Tech is a mounting system that allows holsters to quickly be changed from OWB to IWB and vice versa.
Introducing the Level II Hood Kit by Talon Retention Systems—a must-have for enhancing the safety and security of your holster. Made in the U.S.A and crafted with Holster Makers in mind, this kit allows for seamless integration of a Level II retention system into any holster. Offering a higher level of retention than the standard Level I, the Level II Hood Kit is equipped with an automatic thumb break release mechanism. Whether for additional security compliance or for extra peace-of-mind, this hood kit will help you quickly convert any level I holster to current level II retention standards.
The Speed Lock Retention System by Spetz Gear has clear advantages over similar options currently on the market. This patent pending design allows for a secured closed retention (Level 2) hood, meeting many large professional agencies' holster requirements. The SpeedLock Gen 2 carries over the proven release mechanism from the original with an improved top strap featuring an increased thickness from .060 to .093 and reinforced pivot points. The thumb release is sized and positioned for repeatable positive activation of the release while securing a firm grip, all in one single motion. No additional grip adjustments need to be made prior to, or after the drawing of the pistol. The smooth action thumb release activates the spring-loaded hood in a fraction of a second. This allows for the handgun to be immediately drawn as soon as the grip is secure. This is much different from other designs, which require the depressing of the lock release followed by a forward movement by the user to secure the grip. The rearward unlocking motion saves valuable spacing between the retention system and the mounting platform. Because it does not require the thumb to push down and outward (toward the body), this retention is ideal for mounting on a chest rig/vest carrier system.

IWB Attachments

Raven Concealment Overhook Struts offer a tough snap over to guarantee a snug fit with an easy release. There are ridges on the back of the strut that prevent mounting hardware from damaging sheaths and knives. With the center hole being a slot, the strut can be rotated up to 10 degrees in either direction.
These universal F.O.M.I. belt clips are very practical when you want a thin profile, or tight ride on your holsters & sheaths. They are also very versatile in the way they mount, allowing you slip it over your belt (this model fits 1.50 inch belts), molle straps, or simply over your waistband. Because they are designed with a slight inverse angle, they create spring tension on your belt, and include a bottom retainer lip for security.
These are P.T.L. (Push-to-Lock) IWB Loops by MatchPoint USA. The loops are injection molded and will remain true to their size and will not absorb odors or moisture. The Push-to-Lock IWB Loops feature a pinch-point in the design allowing the loop to make contact with the entire width of the belt when in the closed position. The loops will remain tight against the belt and the molded in grip nodules assist with providing additional friction to tightly secure the holster in place. The P.T.L. IWB Loops will fit both 1.50 inch and 1.75 inch belts.
The Discreet Carry Concepts Monoblock belt clip is designed to be mounted directly to a holster/sheath surface. This clip design allows for a very secure carry on belts, waistlines, or any attachment point where the spring steel clip tabs can be positioned securely. Each spring tab has an integrated security clutch to prevent it from easily becoming detached from the mounting point. The Monoblock clip comes in a new and improved Cerakote® finish in matte DCC Grey and is non-reflective. It resists corrosion very well and can be buffed with most over-the-counter lubricants to remove surface blemishes and wear marks. This clip is a versatile and cost effective attachment solution that can be adapted to virtually any gun holster, knife sheath or carry item.
These
The UltiTuck clip is a 3-n-1 feature tactical mounting clip that sports a versatile 2-hole mounting design. This clip will easily replace many standard 2-hole holster clips, and are very popular with users who like beltless carry with adjustable cant in a tuckable design. These operate on the
This is the Mod-Lok™ Kit by Blade-Tech®. It is an interchangeable mounting system that allows holsters to quickly be changed from OWB to IWB and vice versa. The Mod-Lok™ features (2) Mod-Lok™ Hubs, (2) OWB Mods, (2) IWB Mods, and (4) Mounting Assemblies. To use the Mod-Lok™ Kit, simply attach the Mod-Lok™ Hub to your holster using the included mounting hardware and insert the mod of your choice until you hear an audible click. To change out the mods, pull back on the quick release tab located on the hub and replace the mod.